Lantronix EDS1100 Guía de usuario Pagina 50

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 157
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 49
8: Line and Tunnel Settings
EDS1100/2100 User Guide 49
3. Click Submit.
Packing Mode
Packing Mode takes data from the serial port, packs it together, and sends over the network.
Packing can be configured based on threshold (size in bytes) or timeout (milliseconds).
Size is set by modifying the threshold field. When the number of bytes exceeds the threshold, a
packet is sent.
The timeout field is used to force a packet to be sent after a maximum time. The packet is sent
even if the threshold maximum is not reached.
When Send Character is configured, there is an optional trailing character parameter which can be
specified. It can be a single printable character or a control character.
To configure the tunnel packing mode, perform the following steps.
1. Click Tunnel > Tunnel 1 > Packing Mode. Figure 8-12 shows the page that displays.
Figure 8-9 Tunnel 1 Packing Mode Web Page
2. Click Timeout. Figure 8-12 shows the page that displays.
Vista de pagina 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 156 157

Comentarios a estos manuales

Sin comentarios