Lantronix SCS1620 Guía de usuario descargar pdf (Pagina 68)

SCSxx05/SCSxx20 User Guide 4: Configuration

4-10

1. Select Yes to disable buffering, or select No (default) to enable buffering.

2. Press Enter. You have two options:

 To go back and change any of your settings for this port or group of

ports, select the Setup the Device parameters option, or

 When you are satisfied with the changes you have made, or you wish to

administer additional ports, select Done.

3. Press Enter. If you selected Done, you now confirm your changes.

Confirm Changes

1. To commit your changes to flash memory now:

a) Select Yes. You cannot undo this group of device parameter changes

after this point. (If you select No, you return to the previous screens to

make changes.)

b) Press Enter. There is a short delay while the system saves the changes

to flash memory. After the changes are confirmed, the system offers the

ability to configure a different port or group of ports.

2. You have two options:

 To repeat the process of setting device port parameters, select Yes, or

 To move on to the next option, Device Logging, select No.

3. Press Enter. If you selected No, the Configure Device Port menu returns

with Device Logging Parameters selected.

Device Logging Parameters

You can configure logging parameters on individual ports or on ad hoc groups of

ports.

Device logging parameters include:

 File logging (default is disabled)

 Syslog logging (default is disabled)

 Email logging (default is disabled)

1. Define the port or group of ports. (See Define a Group of Ports to Configure

on page 4-7.)

2. Select Device Logging Parameters from the Configure Device Port menu.

3. Press Enter. The Device Logging Parameters menu displays, with File

Logging Port selected.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 140 141

Sin comentarios

Lantronix SCS1620 Guía de usuario Pagina 68