Lantronix SCS1620 Guía de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
SCSxx05/SCSxx20 User Guide 4: Configuration
4-5
2. Select Yes to use DHCP to obtain the IP address, netmask, and gateway, or
No to enter your own values.
DHCP
What is the value for BOOTPROTO?
Enable DHCP (Please select ‘dhcp’ or ‘none’)
If you choose ‘none’, you MUST provide values for IPADDR,
NETMASK, and GATEWAY.
Dhcp
none
3. Press Enter. The hostname and IP address prompt displays.
4. Enter a value for the hostname. The default hostname is the SCS model
name (e.g., SCS4805). There is a 64-character limit (contiguous characters).
Hostname and IP Address
What is the value of HOSTNAME?
Name of this Host (including domain, e.g.,
host.company.com).
We need the canonical name here to obtain the DNS domain.
IMPORTANT: The DNS domain name is determined from this
answer.
Answer: SCS4805
Be sure to include the domain name as well. In the following example,
we add lantronix.com to the default factory name of SCS4805 to get
SCS4805.lantronix.com.
Hostname and IP Address
Answer: SCS4805.lantronix.com
Note: After the value is accepted and saved, and you have rebooted the
system, the hostname appears as your command prompt and on the front
panel LCD display.
5. Press Enter. The IP address prompt displays.
6. If you selected DHCP in step 2, press Enter through the IP address,
netmask, and gateway prompts (the system will ignore these values), and
continue with Configuring Timezone.
7. If you did not select DHCP in step 2, enter the network IP address for the
SCS.
Do not use leading zeros in the numeric fields for “dot-quad” numbers less
than 100. For example, if your IP address is 172.20.201.28, do not enter 028
for the last segment.
Hostname and IP Address
What is the value for IPADDR?
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 140 141

Comentarios a estos manuales

Sin comentarios