Lantronix EDS8PS Guía de usuario descargar pdf (Pagina 36)

5: Installation of EDS8PR, EDS16PR, or EDS32PR

EDS User Guide 36

LED Description

Status (yellow) Fast blink = initial startup (loading OS).

Slow blink (once per second) = operating system startup.

On = unit has finished booting.

On = EDS is connected to a 100 Mbps Fast Ethernet network. Speed (yellow)

Off = EDS is connected to a 10 Mbps Ethernet network.

Activity (green) Blink = EDS is sending data to or receiving data from the

Ethernet network.

Reset Button

The reset button is on the back of the EDS, to the left of the power connector.

Pressing this button for 2-to-3 seconds reboots the EDS8/16/32PR and terminates all

data activity occurring on the serial and Ethernet ports.

Installing the EDS8/16/32PR

Finding a Suitable Location

You can install the EDS8/16/32PR either in an EIA-standard 19-inch rack (1U tall) or

as a desktop unit. If using AC power, avoid outlets controlled by a wall switch.

Connecting the EDS8/16/32PR

1. Power off the serial devices that will be connected to the EDS8/16/32PR.

2. Attach a CAT 5 serial cable between the EDS8/16/32PR and your serial device.

For a list of cables and adapters you can use with the EDS8/16/32PR, see

Appendix C: Lantronix Cables and Adapters.

3. Connect an Ethernet cable between the EDS8/16/32PR Ethernet port and your

Ethernet network.

4. Insert the power cord into the back of the EDS8/16/32PR. Plug the other end into

an AC wall outlet. After power-up, the self-test begins.

5. Power up the serial devices.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 162 163

Sin comentarios

Lantronix EDS8PS Guía de usuario Pagina 36