Lantronix EDS8PS Guía de usuario Pagina 106

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 163
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 105
12: Maintenance and Diagnostics Settings
EDS User Guide 106
File system Browser
Page Settings
Description
Port
Enter the number of the port involved in TFTP
operations.
Click Transfer to perform the TFTP transfer.
Protocol Stack Configuration
Configure the EDS network stack protocols:
1. Click Protocol Stack on the menu bar. The Protocol page appears with links to
the TCP, IP, ICMP, and ARP protocols.
2. Click on one of the protocol names to see the details of the settings for that
protocol.
TCP Settings
Figure 12-3. TCP Protocol Page
On the TCP page, you may modify the following settings:
Send RSTs:
TCP contains six control bits, with one or more defined in each packet. RST is
one of the control bits. The RST bit is responsible for telling the receiving TCP
stack to end a connection immediately.
CAUTION: Setting this flag may pose a security risk.
Select Enabled to enable the sending of the RST flag.
Select Disabled to disable the sending of the RST flag.
Vista de pagina 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 162 163

Comentarios a estos manuales

Sin comentarios