Lantronix XPort Manual de usuario descargar pdf (Pagina 31)

Using Setup Mode for Configuration

Table 4-14. Reserved Port Numbers

Port Numbers Reserved for

1 – 1024 Reserved (well known ports)

9999 Telnet setup

14000-14009 Reserved for Redirector

30704 Reserved (77F0h)

30718 Reserved (77FEh)

Note: We recommend that you not use the reserved port numbers for

this setting as incorrect operation may result.

The port number functions as the TCP/UDP source port number for outgoing

packets. Packets sent to the unit with this port number are received to this channel.

The port number selected is the Incoming TCP/UDP port and Outgoing TCP/UDP

source port. Use Port 0 when you want the outgoing source port to change with each

connection.

If the port number is 0, the initial value of 5000 actively establishes a connection.

Each subsequent connection increments the number by 1. When the port number

reaches 7999, it wraps around to 5000.

Only use the automatic port increment feature to initiate a connection using TCP. Set

the port a non-zero value when the unit is in a passive mode or when you are using

UDP instead of TCP.

Connect Mode

Connect Mode defines how the unit makes a connection, and how it reacts to

incoming connections over the network. Enter Connect Mode options in hexadecimal

notation.

Table 4-15. Connect Mode Options

Connect Mode Option 7 6 5 4 3 2 1 0

Incoming Connection

Never accept incoming 0 0 0

Accept with DTR Active 0 1 0

Always Accept 1 1 0

Response

Nothing (quiet) 0

Character response (C=connect,

D=disconnect, N=unreachable)

Active Startup

No active startup 0 0 0 0

With any character 0 0 0 1

With DTR Active 0 0 1 0

XPort™ User Guide 4-7

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 86 87

Sin comentarios

Lantronix XPort Manual de usuario Pagina 31