Lantronix Switch XN Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
PremierWave XN User Guide 17
3: Installation of PremierWave XN
This chapter describes how to install the PremierWave XN device server. It contains the following
sections:
Package Contents
User-Supplied Items
Hardware Components
Wi-Fi Protected Setup (WPS)
Installing the PremierWave XN
Package Contents
The PremierWave XN package includes the following items:
One PremierWave XN device
One Power Supply 12 VDC with international adapters
Two External Antenna, RPSMA Connector
One RJ-45 Ethernet Straight Cat5 Cable, 1.5 meter
Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
RS-232/422/485 serial devices that require network connectivity.
A serial cable, as listed below, for each serial device. One end of the cable must have a
female DB9 connector for the serial port.
-
A null modem cable to connect the serial port to another DTE device.
-
A straight-through modem cable to connect the serial port to a DCE device.
An available connection to your Ethernet network and an Ethernet cable.
A working AC power outlet if the unit will be powered from an AC power adapter.
Hardware Components
Front/Top Panel
Figure 3-1 shows the top panel view of the PremierWave XN. Table 3-6, Table 3-7, Table 3-8,
Table 3-9 and Table 3-10 list and explain the behavior of the LEDs on the top panel.
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 103 104

Comentarios a estos manuales

Sin comentarios