Lantronix MPS100 Guía de instalación descargar pdf (Pagina 67)

TCP/IP Host Setup LPR Printing

7-7

7.2.3.1 Using UNIX Commands

Using LPR on AIX hosts involves a slightly different configuration procedure. The queue configuration file

is /etc/qconfig and the format of the entry is different, as shown in the example below. Note the lack of

colons (:) and the required white space.

Figure 7-5: Example AIX qconfig entry

The device name is simply the queue name with a “d” added. Print to the queue using normal lp syntax.

Figure 7-6: Printing to a Queue

7.2.3.2 Using SMIT

The System Management Interface Tool (SMIT) allows you to enable LPD printing and create print queues.

1 At the host prompt, type SMIT.

2 From the main window in the application, choose Print Spooling.

3 Choose Manage Print Server and Start the Print Server Subsystem (lpd daemon).

4 In the Start the Print Server Subsystem dialog box, type BOTH in the first field. Click OK.

5 The message “The lpd subsystem has been started” will appear in the Output section of the next win-

dow. Click Done.

To add and use a print queue:

1 From the main window, choose Print Spooling.

2 Choose Manage Print Server and Manage Print Queues.

3 Choose Add a print queue.

4 From the dialog box that appears, choose remote.

Server_PRT:

device = Server_PRTd

up = TRUE

host = Server_

xxxxxx

s_statfilter = /usr/lpd/bsdhort

l_statfilter = /usr/lpd/bsdlong

rq = Server_

xxxxxx

_S1

Server_PRTd:

backend = /usr/lpd/rembak

% lp -dServer_PRT

filename

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 222 223

Sin comentarios

Lantronix MPS100 Guía de instalación Pagina 67