Lantronix Computer Hardware 900-581 Manual de usuario descargar pdf (Pagina 179)

5: Commands and Levels

domain <text>

Sets the domain name.

<text> = name of the domain.

exit

Exits to the config level.

hostname <text>

Sets the host name.

<text> = name of the host.

if <instance>

Changes to the interface configuration level.

ip address <ip address/cidr>

Sets the IP address and network mask.

Formats accepted:

192.168.1.1 (default mask)

192.168.1.1/24 (CIDR)

"192.168.1.1 255.255.255.0" (explicit mask)

link

Enter link configuration level

mtu <bytes>

Sets the Maximum Transmission Unit (MTU) size.

no default gateway

Clears the default gateway.

no dhcp client id

Clears the DHCP client ID.

no domain

Clears the domain name.

no hostname

Clears the host name.

no ip address

Clears the IP address.

no primary dns

Clears the name of the primary DNS server.

no secondary dns

Clears the name of the secondary DNS server.

primary dns <IP address>

Sets the IP address of the primary DNS server.

secondary dns <IP address>

Sets the IP address of the secondary DNS server.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

show status

Show interface status

state disable

Disables the interface.

state enable

Enables the interface.

write

Stores the current configuration in permanent memory.

if 2 (config-if:wlan0) level commands

bootp disable

Disables BOOTP.

bootp enable

Enables BOOTP.

clrscrn

Clears the screen.

default gateway <IP address>

Sets the configurable gateway IP address to the default value.

default mtu

Restores the default Maximum Transmission Unit (MTU) size.

dhcp client id <text>

Sets the DHCP client id.

dhcp disable

Disables DHCP.

dhcp enable

Enables DHCP.