Lantronix 2100E Manual de usuario descargar pdf (Pagina 33)

4: Web Manager Configuration

WiBox® 2100E Device Server User Guide 33

Serial Settings

To configure a channel’s serial settings:

1. From the main menu, click Serial Settings for either Channel 1 or Channel 2 to display the

Serial Settings page for the selected channel.

Figure 4-5. Channel Serial Settings

2. In the available fields, enter the following information:

Channel

Disable Serial Port

Available on Channel 2 settings only. When selected, disables

communication through the serial port.

Note: Using a telnet session you may enter a baud rate of 00

in channel settings to disable the serial port.

Port Settings

Protocol

Select the protocol type from the pull-down menu for the selected

channel. Available options are RS232, RS422/RS485 – 4 wire mode,

and RS485 - 2 wire mode.

Note: RS422/RS485 – 4 wire mode and RS485 - 2 wire mode apply to

Channel 2 only.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 92 93

Sin comentarios

Lantronix 2100E Manual de usuario Pagina 33