
9: Services Settings
XPort AR User Guide 70
1. Click SNMP on the Main Menu. Figure 9-3 shows the page that displays.
Figure 9-3 SNMP Web Page
2. Enter or modify the fields in Table 9-2.
Table 9-2 SNMP Fields
Field Description
SNMP Agent Select On to enable SNMP.
Read Community Enter the SNMP read-only community string.
Write Community Enter the SNMP read/write community string.
System Contact Enter the name of the system contact.
System Name Enter the system name.
System Description Enter the system description.
System Location Enter the system location.
Traps Enabled Select On to enable the transmission of the SNMP cold start trap messages.
This trap is generated during system boot.
Primary Trap Dest IP Enter the primary SNMP trap host.
Comentarios a estos manuales