Lantronix SCS100 Guía de usuario descargar pdf (Pagina 14)

SCS100/200/400 User Guide 3: The SCS200

Note: The Reset button returns the SCS to its factory default configuration when you

press and hold it during the power-up and boot process. Resetting to factory default will

enable DHCP.

Serial Connector Pinouts

RS-232/RS-485 DB25 Connector

The DB25 connector provides a dual RS-232/RS-485 DTE serial port. The default serial

port settings are 9600 baud, 8 bits, no parity, and 1 stop bit.

DB25 Serial Connector (DTE DB25 Male)

RS-232 DB9 Connector

The SCS200 DB9 connector provides an RS-232 DTE serial port. The default serial port

settings are 9600 baud, 8 bits, no parity, and 1 stop bit.

DB9 Serial Connector

PC Card Slot

The SCS200 PC card slot accepts Type I/II PC cards. As of this writing, the SCS200

software supports 16-bit IEEE 802.11 wireless networking PC cards, PCMCIA modem

cards, and ATA flash disks and hard-drive PC cards. New cards may be added.

Note: Changes in firmware releases may affect compatibility.

3-2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 60 61

Sin comentarios

Lantronix SCS100 Guía de usuario Pagina 14