Lantronix EDS Device Servers EDS16PR Manual de usuario descargar pdf (Pagina 75)

7: Network, Line, Tunnel, and Terminal Settings

EDS Device Servers User Guide 75

An administrator can set up a menu on the EDS for terminal users.

For a terminal attached to serial Line N, set as follows:

Line[N] Protocol = None

Line[N] Command Mode = Always

Terminal[Line N] Login Connect Menu = Enabled.

For Telnet-attached terminals, set:

Terminal [Network] Login Connect Menu = Enabled.

The terminal user will see a menu roughly like this:

Password :

Connection menu: (select by number)

1) Alpha 2) Beta

3) Exit to command line interface 4) Log out

Selection =

The administrator adds destination serial line M to the menu by filling in Line[M] Name.

For this purpose, set:

Line[M] Protocol = None

Line[M] Command Mode = Disabled.

The administrator adds a network destination to the menu by setting up a Host entry for

it. Each named Host entry will appear in the menu.

The administrator adds the Exit to command line interface choice to the menu by

setting:

Terminal[Line N] or Terminal[Network] Exit Connect Menu = Enabled.

The Log out choice is always present.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 174 175

Sin comentarios

Lantronix EDS Device Servers EDS16PR Manual de usuario Pagina 75